volkswagen tools automotive volkswagen tools vw tools -- mmk4mkt

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Complete VW Audi Radio Keys 24.99

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

B90 for Volkswagen Audi 377.00

Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies.Applicable: All Front wheel drive VW (Water cooled) and Audifrom early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.Pictures are for reference only. This is the Volkswagen Audi Kit. The Volkswagen kit "only" available below.

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Die Cast 67 Beetle 29.99
1967 Yellow Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements.
read more:

Volkswagen Only B90 314.00

This is a Volkswagen Kit only.
Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

B90 Volkswagen Only 314.00

This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Volkswagen Only 314.00

This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Die Cast 67 Beetle Red 29.99
1967 Red Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements. This reproduction model has, opening hood, opening doors, opening trunk, adjustable front wheels, workable steering, spare tire and adjustable seats.
read more:

TDI Cam Tools 148.50
Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.
read more:

Brake Tool 25.00

NUMBER 3289Brake Release Tool Volkswagen VR6 JettaTool is used to disconnect brake pedal from booster.This is an Original VW Factory ToolMade in Germany for Volkswagen By Kukko*

Threaded Pin for T.D.C. 25.00

Locking Pin
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
For installing or removing toothed belt /flywheel drive plate.

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Cylinder Head Tools 23.50

Cylinder Head Alignment Kit VA6000 Like Volkswagen Tool 3070 Set comes with (2) pairs of guide pins, 11X1.75mm and 12X1.75mm.VW model Scirocco, Rabbit, Dasher, Fox. Audi model 4000, 5000

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Ribe Key Set 7 Piece 27.50

Ribe Key Set Works on late model Porsche, Volkswagen Audi, Lancer, Fiat, and Lancia vehicles. Ribe style bolts are used on cylinder heads, headlights, and transmission fill plugs.
Please note: These are not Torx tools and they are not XZN they are Ribe!
Set includes seven keys: M4, M5, M6, M7, M8, M9, and M10
If you are unsure of the style you need, please call or email.

Audi VW Headbolt Tool 32.99

Polydrive Cylinder Head Socket for VW/Audi.
This fits in the new special profile. Ref: Volkswagen number T10070.
This is not a torx and it is not a cheesehead or triple square. This is called Polydrive.
The overall length is 168mm. Shaft length is 130.
Super High Quality Tools Made in Germany by Hazet!

Valve Tool for Volkswagen 61.95

Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

TDI Cam Tools 289.50

Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Valve Spring Tool & Bridge 142.50

Valve Tools (2)
Set including:Valve Spring Compressor Bar
Same as Volkswagen Tool Number VW 541/1
Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Valve Spring Tool and Bridge 142.50

Valve Spring Tools Set including:VA6010Valve Spring Compressor BarSame as Volkswagen Tool Number VW 541/1Used for R&R of valve spring or rocker armWith this tool the job can be done with the cylinder head on or off the car.Used in conjunction with tool BridgeApplicable: 924 / 944 VW AUDI 4 5 Cyl. VA6022Support Bridge Same as VW Tool 2036 Used for R&R of valve spring or rocker armUsed in conjunction with tool VW541/1Applicable: Model 924. VW / AUDI 4 5 Cyl.

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Saab Set 3 Clutch Tools 13.99

Set of 3 Clutch Alignment Tools Covers a wide variety of Saab Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

Crankshaft Gear Puller Volkswagen 86.50

Crankshaft Gear Puller for Volkswagen This inexpensive tool solves the problem of removing the crankshaft timing gear, a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation, this tool simply slips under the gear and with a twist of a wrench the gear is easily removed. The highest quality standards are used in the construction of this tool for years of repair shop service. To prevent damage to the end of the crankshaft, a ball bearing swivel is used, while for strength, the griping shoe is made of forged steel. For use on all type I, II, & III engines 40hp and later.

VW428A 49.99
Volkswagen 428a FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Two Pickup Tools 5.50

RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.

Set 7 Marking and Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of 6 Exhaust Tools 00
Item5965VA8DescriptionAssortment of 6 exhaust system tools
read more:

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar and Pin for 2 Valve 139.50

Shortie * Drain Plugs 3/8 Drive Tools 0.00

Serious Stubby Short Pattern 3/8 drive Hex Allen Drain Plug Sockets. Very Hard to find in this short version in a 3/8 drive. These tools will work well in a tight spot.
The larger 1/2 drive tools are too big for some applications.
Sizes available 17mm, 14mm, 13mm, 12mm, 10mm and 8mm.
Sold each or in a set of 6.

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Oil Seal Tool 42.50
Porsche Volkswagen Tool like 204BUsed for proper installationof oil seal on flywheel side of crank shaft. All VW Boxer 4.
read more:

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

Ferrari Tools 00

If you would like a current sales flier on Beta Products and Tools please email with your complete mailing address and literature will be sent to you directly.
email: sales@zdmak.com

MoreBeta Ferrari Tools Here

Heavy Duty Bench Clamp 187.50
313 Volkswagen Porsche Tool Designed for to securely carry the full weightof an air cooled twin turbo Boxer 6Tool Number VW 313Properly suited for a work bench.
read more:

You Searched for

volkswagen tools

Trade Links With ZDMAK