vw special tools automotive vw special tools mercedes coil spring compressor -- mmk4mkt

Stahlwille Quality Tools 00
Special Reversible 1/4 inch bit holding Ratchet.
Overall Length is 110mm.
read more:

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Best Quality Thin Wrench Set 68.50

Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Best Quality! Thin Wrench Set 68.50

Best Quality * Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

41mm Socket 3/4 Drive 40.00

Big 3/4 inch Drive 41mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

24mm Socket 3/4 Drive 16.50

Big 3/4 inch Drive 24mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

36mm Socket 3/4 Drive 26.60

Big 3/4 inch Drive 36mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

21mm Socket 3/4 Drive 16.50

Big 3/4 inch Drive 21mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

30mm Socket 1/2 Drive 15.30

1/2 inch Drive 30mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

22mm Socket 3/4 Drive 15.50

Big 3/4 inch Drive 22mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

24mm Socket 1/2 Drive 12.52

1/2 inch Drive 24mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!
Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

19mm Socket 3/4 Drive 15.50

Big 3/4 inch Drive 19mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

23mm Socket 3/4 Drive 17.50

Big 3/4 inch Drive 23mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

27mm Socket 3/4 Drive 19.99

Big 3/4 inch Drive 27mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

Holding Tool and Wrench Set 49.99

Set of 3 Includes:
Double Waterpump Tool*
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut
Applicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Plus
2 Long Pattern Thin Wrenches
German Car Special Tools
One of each size: 36mm and 32mm
Overall length of 15 inches.
Thickness of each wrench is 8mm.

24mm Extra Deep Socket 31.50

1/2 inch Drive 24mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

28mm Extra Deep Socket 34.50

1/2 inch Drive 28mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

26mm Extra Deep Socket 34.50

1/2 inch Drive 26mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

27mm Extra Deep Socket 34.50

1/2 inch Drive 27mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

BMW 3037 Pack 91.00

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.Applicable: Engine M40, M41, M42, M60, M62
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

BMW 3008 Pack 89.50

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.APPLICABLE M10, M20, M30, M50, WITH 32MM CLUTCH NUT.
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

Hazet Quality Tools 59.50
Bmw Headbolt Tool.
MADE IN GERMANY by Hazet!
E12 Female Special Lock Ball Torx Socket for cylinder head screws M42 4 cylinder/4 valve and M50 6 cylinder/4 valve. Drive size is 1/2 inch.
read more:

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

ZDMAK SPECIAL 2 Brake Tools 49.95

This sale is for two brake tools.
First tool on the UPPER LEFT is Drift Pin 4mm
Tool used for removing disc brake pads.
This Drift pin is designed to press the brake pad retaining pins back w/o damage to pin or caliper.
For a variety of brake applications. (overall length is 7 inches.)

Second tool LOWER RIGHT is the Spreader/Disc Brake Piston Reset Tool
This is a very useful tool for safe resetting of disc brake pistons on vehicles with fixed caliper disc brakes.

Complete VW Audi Radio Keys 24.99

4 Tools for BMW 34.99

Lot of 4 Tools for BMW Repair You get all four tools pictured with thispurchase. The First item (clockwise top left to right) 
A. "Double Waterpump Tool" This special tool covers most popularapplications Used for securing Water Pump Hub from rotating during R & R ofFan Clutch Nut BMW engines:M10, S14, M20, M21, M30, S38, M40, M41, M42, M43,M44, M50, M52, M60, M62, S50
B. "Radio Removal Tool" Pentagon shaped tool with 5 Sides. Theoverall length of this tool is 3 5/8 inches. Appl: Most BMWs. Including E38 E397 Series etc This tool is used to release anti theft radio mounts.
C. "Flexible Shaft" Hex Nut Driver Size on this Nut Driver is 6mm Rubber coated flexible shaft Nut Drivers work well on hose clamps, hex headedscrews and nut screws.
D. "Extra Long 5/8 Spark Plug Socket" (16mm) Overall Length is 4 1/2 inches. 3/8 Drive . Knurled drive end plus rubber insert for better grip.

Hazet Piston Ring Pliers 59.95

Piston Ring Pliers Made in Germany by Hazet! Tool used for 50 100 mm piston rings. The company HAZET was established in 1868 by Hermann Zerver. Today, the Plant 1 at Remscheid is one of the most advanced in Europe. HAZET WERK, the German tool manufacturer from Remscheid demands high standards offering a large range of hand tools and of special tools of highest quality which are especially suitable for the automotive engineering. What matters is the tool quality HAZET Quality is a guarantee for good work results.

Hexagon Offset Wrenches 00
Double ended hexagon bi hex offset socket wrenches, bright chrome plated.
Special heat treatment to increase superficial hardness.Compared to item 937, these tools stand out for their bright finishing resulting from both mechanic and manual processes.To be used with tommy bars in the drive holes.The hole on the short end allows access to nuts fitted onto protruding threads.
read more:

Mercedes and BMW Set 89.50

ON SALE 7 Pc Benz and BMW Tools Including 4 Mercedes Tools a BMW Holding Tool plus 2 Thin Wrenches.
Benz Tools are:
1.Hub Securing Bar 113 0040 Used for securing Waterpump hub from rotating during R&R of Fan clutch nut. This holder bolts onto the hub, as the poly v belt is not in place and cannot be used to lock the hub. Applicable:M112 & M113

2.Locking Hook needed for securing the visco fan couplingduring R&R of 8mm hex fastener w/o removing the radiator: Mercedes M103.

3.Wrench / Holding Bar. This is similar to Benz Number 900 589 0307 00 Comes complete with 8 and 10mm Allen bits.The 8mm is needed for R&R of fan clutch fastenerApplicable M103, 104, 111, 119, 120 OM 602, 603, 605, 606The 10mm is used for adjusting A/C belt tension and R&R of idler pulleyModels 420, 560 with V 819 86 and Newer
4. Thin Wrench 65mm with an 8mm overall thickness and an overall length of 16 inches for proper leverage. Mercedes ref: 120 589 0201 00

BMW Double Waterpump ToolThis special tool covers most popular applications used for securing Water Pump Hub from rotating during R & R of Fan Clutch NutApplicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

Special Pliers 47.50
Special Pliers for Dashboard Lights.
Overall length is 140mm.
read more:

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Bonus Triple Square Set 5 49.99

12 Point Headbolt Tools Plus Drain Plug Socket. (Anyone looking knows how hard it is to find a good price on XZN Tools here you have the extremely popular size 10 and more...)
The Headbolt Set of 4 Includes: 6mm, 8mm, 10mm & 12mm
with 3/8 Drive holders on a rail.
Plus you get
Drain Plug Socket (Upper Left)
Special Large size M16
(Notice the Tamperproof Center on the M16)
Drain Plug Socket Triple Square (12 Point = XZN )
For Porsche Boxster and Audi A4, A6 and Passat
A very handy set for the VW, Audi, Porsche and German car mechanic.

Note: The 4 pieces (Right) are regular XZN and the drainplug tool is tamperproof.
You will get all five pieces with this purchase.

Two 22mm Sockets 34.99

Open Socket Plus Crowfoot Set
Both Tools are 22mm.
Details:
22mm (Open) TubeSocket (Number 4491A
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)2.) R&R of Oxygen Sensor.

Plus Oxygen Sensor Socket 4491b
This is a Special 22mm Crowsfoot Socket with 3/8 Drive
Used for the removal and replacement of Oxygen Sensors
situated within a confined area.
No need to snip the wires leading to the unit when all you want to do is check the sensor.
Applicable: Most European Models. Set of two tools.

Set 2 Sockets 22mm 34.99

Saab Set 3 Clutch Tools 13.99

Set of 3 Clutch Alignment Tools Covers a wide variety of Saab Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Hazet Quality Tools 75.98

Driving Tool for Tensioning Device
special steel, for operating devicewhen changing the V ribbed belt,especially on VW Polo, Golf and Passat, AUDI since 1991.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Set 3 Valve Tools 105.50
VALVE ADJUSTING TOOL SET OF 3
Valve adjusting on the Rabbit, Scirocco, and Jetta 1 requires the use of a special tool to hold the cam followers in the down position in order to remove the shims for replacement. The valve adjusting pliers are then used to remove the shim. Note: The 1.6 and 1.7 liter engines use a different tool than the 1.8 liter engine becuase of valve spacing. The Shim Set works on all solid lifter cylinder heads.
read more:

Spark Plug Wire Plier Bonus Set 47.99

SET OF 4 TOOLS
Spark Plug Wire Pliers
Used to remove the newer high voltage type wires
Wide grip section and special angle. makes it
easy to remove wires without separating crimps.
Applicable: 102, 103, 104, 110, 115, 116, 117, 119, 120
Same as Mercedes Tool Number 104 589 0037 00
also same as Zdmak item M104 0037X
PLUS SET OF 3 SOCKET TOOLS
Set of 3 Spark Plug ToolsIncluding : Extra Long 5/8 (16mm) Spark Plug SocketOverall Length is 4 1/2 inches.3/8 Drive size. Knurled drive end plus rubber insert for better grip.Plus one of each Flexible 5/8 and 13/16 Spark Plug Sockets3/8 Drive Flexible joint 6 Point Socketswith Neoprene insert. Excellent for the professional or shadetree mechanic.

Hazet Quality Tools 28.99

Assembly Tool special steel, with T Handle,for mounting and dismounting the draw spring of hand brake shoese.g. on MERCEDES BENZ passenger cars with rear disk brakes

You Searched for

vw special tools

Trade Links With ZDMAK